Fashion,  Football,  Gift Ideas,  Machine Embroidery,  Monogram,  Sports and Outdoors,  Tutorials

Cork Bottom Tote in 14 Easy Steps

DIY Monogrammed Cork-Bottom Bag

in 14 Easy Steps

Whether you need it for the beach, going to class, a game-day tailgate party, or to carry your latest sewing project, this tote is a perfect size and is always in style. I have made several of these as gifts and the recipients always love them. They always comment about how the cork bottom gives it just the right touch of sophistication. The best part is they are so simple to make!

DIY Game-Day Monogrammed, Cork-Bottom BagDIY Monogrammed Cork-Bottom Bag

Supplies

4 Fat Quarters or 1 yard of fabric

2 pieces of cork fabric cut to 18″ x 4-1/2″

2 straps, each 57″ long

Clover® Wonder Clips

Fabric Marker

Sulky Soft ‘n Sheer Extra™ or Sulky Fuse ‘n Stitch™ Stabilizer for extra stability

Cotton+Steel® Thread by Sulky or Sulky 30 wt. Cotton Thread

Sulky 40 wt. Rayon Thread for the machine embroidery

Sulky Cut-Away Plus™ Stabilizer

The Monogram –

  1. I used Interlocking Vine Satin & Filled Alphabet from SWAKembroidery.com. I made sure the center of the monogram was 9″ in from the edge, and about 7″- 9″ up from the bottom. That is your preference; you decide where you want the monogram to sit on the bag vertically, but centering it horizontally is pretty important.
  2. I used Sulky 40 wt. Rayon Thread in the top and bobbin and I used Sulky Cut Away Plus because the this design is pretty dense (heavy and thick).

DIY Game-Day Monogrammed, Cork-Bottom BagDIY Game-Day Monogrammed, Cork-Bottom Bag

Directions

  1. Cut 2 fat quarters 18″ x 15-1/2″ for the outside fabric (be mindful to keep the monogram centered); and cut the other 2 fat quarters 19-1/2″ x 18″ for the lining. The 2 cork pieces should be cut 18″ x 4 1/2″ DIY Game-Day Monogrammed, Cork-Bottom Bag
  2. Pin the straps in place, 3-1/2″ in from each of the sides. DIY Game-Day Monogrammed, Cork-Bottom Bag
  3. Use the Clover Wonder clips instead of pins (you can’t pin the cork because the holes from the pins don’t go away); and with right sides together, sew the cork piece onto the bottom of the fabric (the 15-1/2″ bottom) with a 1/4″ seam allowance.  (Hint:  Place the flat side of the clips on the bottom, as shown below, for easier stitching.)DIY Game-Day Monogrammed, Cork-Bottom BagDIY Game-Day Monogrammed, Cork-Bottom Bag
  4. Press the seam towards the fabric. Surprisingly, the cork fabric acts very much like regular cotton fabric. I did use a medium temperature on my iron but I probably could have used high heat and been fine. As always, test before you ruin a project!
  5. Topstitch the two sides of each strap, and leave 1/2″ unstitched at the top. Be sure to backstitch at the start and end of each stitching line.DIY Game-Day Monogrammed, Cork-Bottom Bag
  6. Place the front and back pieces right sides together, and sew the sides and bottom together with a 1/4″ seam allowance.DIY Game-Day Monogrammed, Cork-Bottom Bag
  7. Box the bottom corners by laying the corner out, match the side seam with the bottom seam, and measure in 2″ from the corner.DIY Game-Day Monogrammed, Cork-Bottom Bag
  8. Mark the line and stitch. Be sure to backstitch.DIY Game-Day Monogrammed, Cork-Bottom BagDIY Game-Day Monogrammed, Cork-Bottom BagDIY Game-Day Monogrammed, Cork-Bottom Bag
  9. Now for the lining! I stabilized my bags by fusing Sulky Soft ‘n Sheer Extra to the lining pieces of the bags. For extra stability, use Sulky Fuse ‘n Stitch. Sulky Soft 'n Sheer Cut-Away embroidery stabilizer is permanent, textured, non-woven nylon that is ultra-soft next to skin. Sulky Fuse 'n Stitch Embroidery Stabilizer is a firm, crisp, heavyweight iron-on permanent stabilizer that is ideal for projects that need extra stiffness and retained support.
  10. Sew the two lining pieces, right sides together, along both sides and across the bottom, with a 1/4″ seam allowance.   Box the bottom the same way you did with the outside pieces. DIY Game-Day Monogrammed, Cork-Bottom Bag
  11. Fold and press 1/2″ down on the top of the lining (folded over so the wrong sides are touching). DIY Game-Day Monogrammed, Cork-Bottom BagDo the same with the outside piece (this is why you didn’t sew the strap down that last  1/2″ at the top).  NOTE: If you bought Nylon straps, be careful with the iron, they could melt (ask me how I know 🙂 ).DIY Game-Day Monogrammed, Cork-Bottom Bag
  12. Turn the outside of the bag right sides out, and put the lining inside.
  13. Carefully clip the top edges together matching the sides seams. This is also your chance to do a reality check – the lining with the outside – and adjust if one is bigger than the other.DIY Game-Day Monogrammed, Cork-Bottom Bag
  14. Topstitch the lining to the bag about 1/8″ from the folded edge. DIY Game-Day Monogrammed, Cork-Bottom BagDIY Game-Day Monogrammed, Cork-Bottom Bag DIY Game-Day Monogrammed, Cork-Bottom BagDIY Game-Day Monogrammed, Cork-Bottom BagDIY Game-Day Monogrammed, Cork-Bottom Bag

You are done! Enjoy your new cool bag.DIY Game-Day Monogrammed, Cork-Bottom Bag

Print Friendly, PDF & Email