Thanksgiving Placemats
Fall,  Home Decor,  Machine Embroidery,  Specialty Threads,  Thanksgiving,  Tutorials

Thanksgiving Placemats with Machine Embroidery

Thanksgiving placemats

Thanksgiving Placemats using Poly Star Thread

by Ellen March

Create a set of Thanksgiving placemats that showcase sparkly Poly Star™ thread embroideries. The large-scale line-art designs are easy to embroider with the 30 wt. thread, offering a touch of glitter and a pronounced texture to the placemats.

Supplies listed are enough to make six Thanksgiving placemats measuring approximately 14” x 20”.

Thanksgiving placemat supplies

THANKSGIVING PLACEMATS SUPPLIES

PREPARE THE PLACEMATS

From the print fabric, cut two 5” x 14” rectangles and one 14” x 20” rectangle for each placemat. Be mindful of the fabric direction, if applicable.

From the batting, cut two 5” x 14” rectangles and one 18” x 22” rectangle for each placemat.

Note: If you’re able to use a smaller hoop, you’ll be able to use less solid fabric. For the featured designs, a 360 x 260 hoop was used. (Use a hoop that measures at least 260 x 260 to embroider the 9” design size as shown.)

EMBROIDER THE THANKSGIVING PLACEMATS DESIGNS

Load the first embroidery design into the machine.

To set up the machine, insert a size 90/14 Embroidery or Titanium Top Stitch needle. Then, thread the machine with Poly Star in the needle and Sulky Bobbin Thread in the bobbin. Choose the color of your choice from the Fall Poly Star 6-pack.

Stack the following fabrics on a flat work surface in this order: Sulky Soft ‘n Sheer, batting, solid fabric right side up. Use KK 2000 to secure the layers.

Hoop the fabric sandwich. Then, place the hoop onto the machine.

Embroider the design.

thanksgiving placemats embroidery

Next, remove the hoop from the machine and clip any jump threads from the right and wrong side.

CONSTRUCTING THE PLACEMATS

Remove the embroidered fabric sandwich from the hoop. Then, trim the rectangle to 12 1/4” x 14”, centering the design.

Stack one small print fabric rectangle on top of one small batting rectangle. For a secure hold, use KK 2000 between the layers and smooth the fabric flat.

Stitch the long rectangle edge to the embroidered rectangle right edge.

stitch rectangles for placemat

Then, press the seam allowance toward the print fabric. Topstitch 1/8” from the seam along the print fabric.

topstitch placemat seam

Repeat to stitch the remaining small print fabric rectangle to the left edge of the embroidered rectangle.

If needed, trim the placemat so all edges are even.

finished placemat front

FINISHING THE THANKSGIVING PLACEMATS

Place the large print rectangle over the embroidered rectangle, with right sides facing.

Thanksgiving Placemats supplies

Stitch the placemat perimeter with a ½” seam allowance, leaving a 4” opening along one side edge for turning.

Trim the seam allowance to ¼”. Then, clip the corners.

Turn the Thanksgiving placemat right side out. Use a chopstick or point turner to ensure crisp corners.

Turn the opening seam allowances toward the wrong side; clip shut. Press the placemat gently using a low to medium temperature iron.

Topstitch the placemat 1/8” from the perimeter, closing the opening with the stitches.

topstitch placemat perimeter

If desired, stitch additional quilting along the print rectangle edges and/or above and below the embroidery design.

Thanksgiving placemat - turkey

Repeat to make five more placemats, using different designs from the collection and swapping thread colors from the Fall Poly Star 6-pack.

Thanksgiving placemat - Family

Print Friendly, PDF & Email

I am the Director of Content for Sulky of America. The former Editor in Chief of Sew News and Creative Machine Embroidery magazines, I hosted Sew it All TV on PBS for nine seasons. I've appeared on It's Sew Easy on PBS, DIY Network's Uncommon Threads, Hallmark's Marie Osmond Show, MacPhee Workshop and more! Come sew with me!

One Comment