Crazy Patch Valentine Holder
Gift Ideas,  Quick Projects,  Quilting,  Tutorials,  Valentine's Day

Crazy Patch Valentine Holder Using Hexies & Free-Motion Stitching

Crazy Patch Valentine Holder

by Melissa Shields

Crazy Patch Valentine Holder

Create a fun “Crazy Patch” Valentine Holder to contain the cards you’ll receive this Valentine’s Day. This also makes a great kid’s project to take to school, and it’s a fun stash buster that teaches some new techniques. Use a bunch of leftover hexies to create the crazy heart Valentine, or cut new ones from coordinating fabric prints. A die-cutting machine, such as AccuQuilt, Sizzix or Cricut, is especially helpful for this process. (The heart template can be cut this way, too!)

WHAT IS A CRAZY PATCH

Crazy patch is an old quilting technique that was a way to use up scraps and practice embroidery.  Traditional crazy patch didn’t use just one shape but many different shapes and where the fabrics overlapped, embroidery was added. This isn’t a piece that’s going to be washed, so the edges are left raw. Free-motion quilting (FMQ) holds it all together. The quilting also adds a subtle texture to the piece.

SUPPLIES

Sulky may earn an Affiliate Commission if you purchase something through recommended links on our post. Don’t worry – this does not increase your cost. 

CRAZY PATCH HOW-TOs

Peel the paper backing away from the Fabri-Solvy and place the sticky side face up on a flat surface.

Place the hexies right side up on the Fabri-Solvy, overlapping the edges by about 1/8″.

Set the machine for free-motion stitching. Install a 90/14 Organ quilting needle. Thread the needle with 30 wt. Blendables thread and load the bobbin with 60 wt. thread.

Free-motion stitch over the hexies using a favorite pattern or random design. (Non-slip quilting gloves are great tools to maneuver the fabric under the presser foot.)

Wash away the stabilizer by submerging the piece under water, running water over it and squeezing it out. Repeat until all the stabilizer is removed; let dry.

Using the heart template, cut the heart out of the fabric.

Place the heart right-side up over the Sulky Stiffy stabilizer.

Set the machine for a satin stitch. Satin stitch the heart perimeter.

satin stitch crazy patch heart edges

Tear away the excess stabilizer beyond the outer stitching, leaving the excess inside the heart to help it stand.

Paint the box or cover it with decorative wrapping paper.

Attach the heart to the box using hot glue.

cutout crazy patch Valentine holder

TIPS FOR CRAZY PATCH VALENTINE HOLDER

Sulky Fabri-Solvy is sticky!  It holds fabric with no problems, but it also sticks to you and your shirt if you try to rush.  Slow down and take your time on this step. The rest goes quickly. Here are some additional tips for creating the Crazy Patch Valentine heart:

  1. Overlap the edges of the hexies so you don’t have holes. You are making fabric! But if you have a few small holes, it’s OK! No one will notice them.
  2. You may have to rinse the fabric more than once. If it’s still stiff after it dries just rinse it again. A drop or two of mild detergent will help, too.
  3. Satin stitching can be intimidating. Practice on scraps to adjust the machine settings until the desired results are achieved. The settings for one machine might not work for another machine. They are all just a little different. For the featured project, the machine was set for a zigzag width of 3 and a stitch length of 0.8 mm. That is a good starting point if you’re new to satin stitching. Don’t pull the fabric when sewing; if the machine isn’t advancing the fabric, adjust the stitch length.
  4. Use the inside of the sewing machine foot to guide the fabric. Just like in traditional piecing, use the outer (or inner) foot edge to maintain a straight seam. Pivot at the lower-edge corners and at the center point. Slow and easy will win the race and if there’s a minor goof, only you will ever see it.

MORE USES FOR HOLDER

Try making several hearts and joining them at the upper edges to make a unique bunting.

Swap this holder for your inbox at work and add a machine embroidered phrase, like a conversation heart. “The Doctor Is In”, “Lovely to Meet You”,” FAX ME”, “CUTIE Pie”, all are great options.

Make two hearts and stitch the left edges together to make a card that opens and closes. Use a Hera Marker to create a crisp fold-line along the edge. Then write a message inside on the Stiffy stabilizer.

Remove the Stiffy stabilizer from inside the heart and applique it onto a mini quilt. Hang the mini quilt on your door or gift it to a friend.

The ideas are endless! What will YOU do with your heart?

 

Learn more about Melissa Shields on her website, Facebook, Twitter and Instagram.
Print Friendly, PDF & Email

I am the Director of Content for Sulky of America. The former Editor in Chief of Sew News and Creative Machine Embroidery magazines, I hosted Sew it All TV on PBS for nine seasons. I've appeared on It's Sew Easy on PBS, DIY Network's Uncommon Threads, Hallmark's Marie Osmond Show, MacPhee Workshop and more! Come sew with me!

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.