Christmas,  Machine Embroidery,  Sewing Tips,  Sulky Embroidery Club

Tips for Machine Embroidery on Onesies


I have been all about baby lately! I have several friends that are having babies soon so I am making lots of baby things. I made a sweet blanket for one and Taggies for a set a twins. (Go here to check out the blanket and here for the Taggie tutorial). Next up, the onesies! I love seeing a brand new baby in a cute little onesie with a name or little embroidered applique on it, but let’s be honest, onesies are tiny and can be hard to embroider! Here are a few tips to make things a little easier.

  1. Hoop Size. Use a hoop that is about the same width as the onesie. This will help you with your placement and sizing the design or letters I used my medium hoop (5 x 7, I think). You aren’t going to actually hoop the onesie so don’t worry about it having to go inside the tiny little garment.

sticky + for onesie

  1. Sulky Sticky+. When it comes to Onesies, Sticky+ is your best friend. Hoop the Sticky+ with the grid release sheet side up. Score the release sheet with an X using a straight pen, then remove the release sheet. Now you are ready to stick the onesie to the stabilizer instead of trying to hoop it.

sticky + in hoop

  1. Turn the onesie inside out. Straighten the onesie out with the front facing down. When you are ready to place the onesie, figure out where you want the design to go and put that in the center of the hoop and stick it down, flattening out any wrinkles, but being careful not to stretch or distort the knit. Once you are happy with the placement, turn the onesie back the right way being careful not to unstick the front from the Sulky Sticky+.

inside out onesie

  1. Clover Wonder Clips to the rescue! Now it is time to turn the Onesie right side out again. Go ahead and turn it all the way, then gather up the edges and start clipping them out of the way. I love Clover Wonder Clips for this! They help keep the onesie away from the area that you are going to embroidery but they are not hard to clip on.

wonder clips for onesie

  1. Watch it stitch out. I have no idea why, I guess my machine just needs to be the center of attention, but if I am not watching it, it will mess up (she is a little diva!). But truly, when doing these tiny garments, it is best to watch. That way if your needle catches an edge that slipped out of a clip, you can stop it right away and fix the issue. Another tip: If your machine has the ability to baste your onesie down, that is a good idea, but I don’t have that feature on my machine.

watch it stitch applique

watch it stitch

  1. If it’s applique, follow the directions and use duck bill scissors. I downloaded this cute elephant applique from the Sulky Embroidery Club. When you download designs from the Club, they come with a PDF of the directions of how to embroider the design. It even tells you when to put down the applique fabric and when to cut it out! I love that! When cutting out appliques, Duck Bill Scissors are great. They protect your stitching line but still cut very close.

Photo Apr 22, 12 06 35 PM

  1. Finishing touches can make all the difference. After the embroidery is done, unhoop the stabilizer, cut the jump stitches and carefully tear the stabilizer away. Be sure to tear towards the stitches so you don’t distort your design. I like to spray mine with a little of my homemade starch (recipe is in this post) because it is scented with lavender essential oil and then iron it flat. Now it is ready to be the best gift at the baby shower!

onesie done 1

onsie done 2

Do you have any tips for embroidering on tricky things like Onesies? If so, put them in the comments!

Happy Sewing!

Print Friendly, PDF & Email


Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.